Skip to content
Sutter Butte Dusters

Rules and licensing

DPR pesticide lookup: labels, registrations and use data

By the Sutter Butte Dusters team · · 7 min read

A yellow Ag Cat biplane parked at a rural airstrip at dawn, with a clipboard holding a pesticide label and a work order on the lower wing in the foreground.

The California Department of Pesticide Regulation (DPR) runs the public databases that growers, pest control advisers (PCAs) and applicators use every season. A DPR pesticide search shows the registration status, the California label and the use history of a product. This guide shows which DPR tool answers each question, and how a permit and a PCA recommendation fit in before a plane flies the job.

What is DPR and what does it control?

DPR is the state agency that registers pesticide products for sale and use in California. A product needs a federal registration from the U.S. Environmental Protection Agency (EPA) and a separate state registration from DPR. A product with an EPA number is not legal to sell or use in California until DPR registers it.

DPR also sets the state rules for use, licenses PCAs and applicators, and collects use data. The county agricultural commissioner (ag commissioner) enforces those rules in each county. Our guide to pesticide application rules in California explains how the PCA, the commissioner and the pilot share that work.

Which DPR pesticide tool do you need?

DPR has several public tools, and each one answers a different question. The table matches a common question to the tool and to what the tool shows.

What you want to findWhich DPR toolWhat it shows
Is the product registered in California now?CalPEST public searchProduct status (active or inactive), registration number, company and registration dates
The current accepted California labelCalPEST product information reportThe label that DPR accepted for the product
Is the product a California restricted material?CalPEST public search, "Restricted Type" filterFederally restricted, California restricted, both or none
Products by chemical code or site codeCalifornia Product/Label DatabaseRegistrant, ingredients, site and pest uses, formulation and status
How much of a chemical people used, and whereCalPIPPesticide Use Report data by year, county, section, crop, product and chemical
Annual summary reports and raw data filesDPR Pesticide Use Reporting pageSummary reports for 2017 to 2023, and archived data files back to 1970

DPR moved its registration work to a new system, the California Pesticide Electronic Submission Tracking system (CalPEST). The older Product/Label Database page still works. The page itself warns that its results may not be fully up to date during the move to CalPEST. For a decision about a field, check the product in CalPEST first.

How do you look up a pesticide label in California?

A pesticide label lookup in CalPEST takes a few minutes. Have the product container or the PCA recommendation in front of you. The EPA registration number on the label is the most exact search term.

  1. Open the CalPEST public search page.
  2. Select the "Products" search.
  3. Set "Product Status" to "Active."
  4. Type the registration number in the "Registration Number" field.
  5. If you do not have the number, type the product name instead.
  6. Run the search and find the product in the results grid.
  7. Compare the company name with the name on the container.
  8. Open the "Full Product Information Report" for that product.
  9. Open the current accepted label from the report.
  10. Compare the label version with the label on the container.

A search by product name can return many similar products. One trade name often covers several formulations from the same company. Always confirm the registration number before you trust a result.

If a label is not online yet, DPR says you can request it through its public records portal. DPR then adds the label to the CalPEST product information report.

The label tells you the crops, the rates, the application methods and the intervals. Our guide to how to read a pesticide label walks through each part. The restricted entry and preharvest intervals need special attention before a harvest.

How do you check a DPR product registration?

A DPR product registration check confirms that a product is legal to sell and use in the state today. Do this DPR pesticide check each season, because a registration can change. The CalPEST results grid shows the status as "Active" or "Inactive," with the date of the change. An inactive product can still sit in a barn.

The California pesticide database covers every product that DPR registers, not only farm products. Use the "Pest, Site, and Site Group" filters to narrow the list to your crop. For example, select walnut as the site to see products with a walnut use.

Registration does not mean the product fits every use. The label must list the crop or site. The label must also allow the application method. A product with a "ground application only" statement cannot go on by air.

What is a restricted material and who issues the permit?

A restricted material is a pesticide that DPR controls more tightly because of its hazard. The CalPEST "Restricted Type" filter shows whether a product carries a federal restriction, a California restriction or both.

The county ag commissioner issues the restricted materials permit in the grower's name. The permit lists each field, the crop and the restricted materials that the grower expects to use. A grower who uses only nonrestricted products still needs an operator identification number from the county.

Before each restricted-material application, someone submits a notice of intent (NOI) to the commissioner. The NOI goes in through CalAgPermits, usually at least 24 hours ahead. The rules guide lists the NOI deadlines, the permit steps and the SprayDays California notice for neighbors.

What is a California pesticide use report?

A California pesticide use report (PUR) records each agricultural application. DPR states that California has required detailed reporting for nearly all agricultural pesticide uses since 1990. The reports go to the ag commissioner of the county where the work happened.

Two different people can file the report, and the deadlines differ (3 CCR 6626):

Who filesDeadlineCopy
An agricultural pest control business, such as an aerial applicatorWithin 7 days after the applicationA copy to the property operator within 30 days
The property operator, when the operator made the applicationBy the 10th day of the month after the workThe operator keeps the records

When a pest control business files the report, the grower does not file a second report for that job. The grower keeps a copy of the business report for two years. DPR says that most reports go in electronically through CalAgPermits.

How do you use CalPIP to look up pesticide use data?

CalPIP is the California Pesticide Information Portal. It lets anyone run a custom search of the Pesticide Use Report data. It also holds Groundwater Protection Area data and PRESCRIBE data for endangered species limits.

As of the current CalPIP release, the most recent year of PUR data is 2023. Data from 2018 to 2022 was also refreshed. So CalPIP shows past use, not this season.

Use these filters to build a search:

  • Year: one or more report years.
  • Location: county, a township, range and section (COMTRS), or a ZIP code.
  • Site or crop: for example, rice or walnut.
  • Product or chemical: a product name or an active ingredient name.
  • Report type: agricultural or nonagricultural use.

A PCA can use CalPIP to see which chemistries growers used on a crop in a county. That history helps the PCA rotate modes of action. A researcher or a neighbor can use it to see total pounds applied near a town.

How does a PCA recommendation fit in?

A PCA is a person with a DPR license to make agricultural pest control recommendations. When a PCA makes a recommendation, the PCA must put it in writing and give the grower a copy. The written recommendation names the product, the rate, the field, the pest and any warnings.

A good PCA checks the DPR registration and the current label before writing the recommendation. Many PCAs also time insect sprays with degree days. Our NorCal spray timing tracker shows degree days since biofix for navel orangeworm, codling moth and peach twig borer.

What does the aerial applicator check?

The aerial applicator works from the written recommendation and the label. Before the job, the pilot and the ground crew confirm these items:

  • The label allows aerial application on the crop.
  • The product status is "Active" in California.
  • The grower has a permit and an NOI on file for a restricted material.
  • The PCA recommendation matches the field, crop and product on the work order.
  • The field map shows sensitive areas such as homes, schools and waterways.

After the job, the pest control business files the use report with the county within 7 days. The grower gets a copy within 30 days.

Aerial application from Live Oak

Sutter Butte Dusters flies aerial application (crop dusting) from 4080 Clark Rd in Live Oak. We fly five Ag Cats and one Air Tractor 602 over Sutter, Yuba, Butte, Glenn, Colusa, Placer and Yolo counties. Send us the PCA recommendation and the field location, and we will plan the job to the label. Get a quote for your field.

Get a quote for your field

Questions

Crop nutritionNitrogen deficiency in crops: signs, tests and fixesOrchardsLeaffooted bug in almonds and pistachios: ID and timing

Get on the schedule.

Tell us the field and the job. In a hurry? Call (530) 695-2294, Mon–Fri, 8am–3pm.

PCA with a written recommendation? Send it here.

CallRequest an application