Skip to content
Sutter Butte Dusters

Orchards

Chill hours and chill portions for Sacramento Valley orchards

By the Sutter Butte Dusters team · · 7 min read

A yellow Ag Cat biplane parked on a frosty airstrip in winter tule fog, with bare dormant orchard rows faint in the background.

Chill hours are the cold winter hours that fruit and nut trees need before they can leaf out and bloom evenly. Walnuts, almonds and prunes in the Sacramento Valley each need a different amount. This guide compares the three chill models and lists the UC chill needs for our main crops. It also explains how chill shapes the dormant and bloom sprays that we fly.

What is winter chill?

Winter chill is the cold that a dormant tree collects during its rest period. Deciduous fruit and nut trees drop their leaves in fall and enter rest. During rest, the buds will not grow, even on a warm day with moist soil. Cold temperatures break the rest.

UC Cooperative Extension (UCCE) advisers explain that each species, and each variety, needs a different amount of chill (UCCE: Counting winter chill). Early-leafing walnut varieties need less chill than late-leafing varieties. After the tree meets its chill need, warm spring days push the buds to open.

The same article notes that low-chill winters historically came every 10 to 15 years in the Sacramento Valley. December and January have been the most important months for chill.

What happens when trees get too little chill?

Low chill gives late, uneven bloom and leaf-out. UCCE lists these effects:

  • Bloom and leaf-out start late and stretch over a long period.
  • Some buds drop, and fruit set falls.
  • Yield and nut or fruit quality can suffer.

In walnuts, UCCE adviser Katherine Jarvis-Shean describes scattered budbreak and south-facing buds that never open (UCCE: Winter chill, dormancy and walnut management, 2023-2024 update). A long bloom also gives a wider range of nut sizes and more harvest shakes. It makes the timing of blight and husk split pest control harder.

The winters of 2013-2014 and 2014-2015 show the effect. In Davis, walnut leaf-out came 8 days later than average in 2014 and 11 days later in 2015.

How do you calculate chill hours?

Here is how to calculate chill hours. The model counts each hour between 32°F and 45°F as one chill hour. Some growers use a simpler version that counts every hour under 45°F. The model does not subtract anything for warm hours.

To count them yourself:

  1. Get hourly air temperatures from a station near your orchard.
  2. Start the count on November 1.
  3. Give each hour from 32°F to 45°F a value of 1.
  4. Give every other hour a value of 0.
  5. Add the values to a running total.

This model is easy to count, and older chill needs use it. But a model must match how the tree responds. UC researchers found that the chill hours model can call a warm winter normal.

How do chill hours, the Utah model and chill portions compare?

Researchers use three common models. Each one gives a different value to the same hour.

FeatureChill hoursUtah model (chill units)Dynamic model (chill portions)
UnitHoursChill unitsChill portions (CP)
Temperatures that count32°F to 45°F, all equalFull value from 37°F to 48°F; part value just above and belowMost value from 43°F to 47°F; none at 32°F or 54°F
Upper limit45°FPositive units stop near 54°F54°F
Effect of warm hoursNoneHours from 61°F to 65°F subtract 0.5 unit; hours over 65°F subtract 1 unitWarm hours soon after cold hours can cancel part of the chill
Use in CaliforniaOlder chill needs, quick checksFirst built for Utah orchards (Richardson and others, 1974)Current UC chill needs for tree crops

Sources: UCCE Counting winter chill, the UC Fruit & Nut Center chill model pages and a UCCE talk on how to count winter chill. The dynamic model comes from Fishman and others (1987).

Dynamic model chill works in two steps. Cold hours fill a "bucket" with a chill precursor. Warm hours soon after can empty the bucket. When the bucket fills, the tree locks in one chill portion, and warm weather can no longer remove it.

Why do UC researchers prefer chill portions?

UC advisers say that chill portions are the better way to count chill for tree crops in California and other mild, Mediterranean climates. They give three reasons:

  • Chill portions give different values to different temperatures. The most effective chill comes from 43°F to 47°F.
  • Chill portions count up to 54°F. Most of our tree crops evolved in mild winters, so this range fits them better.
  • Warm hours that closely follow cold periods can subtract from the total.

The winter of 2013-2014 shows the difference. Chill hours showed an average to high winter. Chill portions showed low chill. The walnut trees leafed out late, so they agreed with chill portions.

Fog also matters. A UCCE talk cites research by Baldocchi and Waller (2014). Central Valley tule fog was less common from 2001 to 2012 than from 1981 to 1999. Fog keeps orchard buds cool on winter days, so less fog can mean less chill.

How many chill portions does each crop need?

Chill needs are estimates, and they vary by variety. Researchers do not have exact values for all California tree crops yet. The table shows values that UCCE advisers published.

Crop and varietyChill needSource
Almond (range of California varieties)22 to 32 CPUCCE, Pope 2016
Almond 'Nonpareil'23 CPUCCE, Pope 2016
Walnut (range of varieties)38 to 72 CPUCCE, Pope 2016
Walnut 'Payne'38 CP (627 chill hours)UCCE, Counting winter chill
Walnut 'Hartley'54 CP (984 chill hours)UCCE, Counting winter chill
Walnut 'Chandler'45 to 50 CP (1,015 chill hours)UCCE, Counting winter chill
Walnut 'Chandler', field experienceAbout 60 to 65 CPUCCE, Jarvis-Shean 2024
Prune 'Improved French'About 55 to 60 CPUCCE, Chilling and prunes, Pope 2015
Peach and nectarine (range of varieties)8 to 75 CPUCCE, Pope 2016

The walnut chill requirement in chill hours comes from the UC Walnut Improvement Program (2006). These values are the hours that buds needed before they broke after 15 days at 71.6°F. The 'Chandler' estimate of 45 to 50 CP came from the low-chill year of 2014. Field experience since then points to the higher 60 to 65 CP range.

Almond chill hours and portions are low, so Sacramento Valley winters usually meet the need. Walnuts and prunes are the crops at risk in a warm winter.

How do growers track chill?

Growers can follow chill online. The UC Fruit & Nut Research and Information Center runs a free chill calculator. It uses hourly air temperatures from CIMIS stations and shows chill hours and chill portions for the current winter and past winters. Our post on CIMIS weather data lists the stations in Sutter, Yuba, Butte, Glenn and Colusa counties.

Track chill in four steps:

  1. Open the UC Fruit & Nut Center chill calculator.
  2. Select the CIMIS station nearest to your orchard.
  3. Set the start date to November 1.
  4. Compare this winter with the last five winters.

For prunes, UCCE counts from November 1 to February 15. A CIMIS station sits in a grass field, so its data can differ from your orchard. UCCE advisers suggest that you keep a temperature recorder in the orchard and calculate your own chill portions with the UC spreadsheet.

If chill looks low by January, talk to your pest control adviser (PCA) and your farm adviser. Some growers use a dormancy-breaking treatment in a low-chill winter. Use only a product whose label lists that use on your crop. Follow the label and your PCA's written recommendation.

How do chill and bloom timing affect dormant and bloom sprays?

Chill sets the bloom date, and the bloom date sets most early-season sprays. The usual order in our orchards follows the tree:

Tree stageCommon aerial workEffect of low chill
Dormant and delayed dormantInsect and scale sprays on bare woodBud swell comes later, so the delayed dormant window can last longer
Pink bud to full bloomBrown rot and other bloom disease spraysBloom stretches out, so one spray may not cover all the flowers
Walnut leaf-out and bloomWalnut blight spraysLeaf-out is scattered, so the timing for each block is harder

A long, uneven bloom can add treatments. The UC IPM almond guideline notes that a long, wet bloom can need a second or third brown rot treatment near full bloom. Our post on orchard spraying by air explains the bloom timings for almonds, prunes and walnuts. The walnut blight post covers the rain and catkin timing.

Honey bees work almond orchards at bloom. Your PCA chooses each product and rate, and the label sets the limits.

After bloom, the count switches from cold to heat. Our free NorCal spray timing tracker counts degree days for codling moth, navel orangeworm and peach twig borer and shows the UC IPM treatment window.

Chill, bloom and our orchard work

We fly dormant and bloom sprays for orchards across Sutter, Yuba, Butte, Glenn and Colusa counties from our strip in Live Oak. In a low-chill year, bloom can arrive late and stretch for weeks, and wet soil can keep ground rigs out of the rows. An aircraft can cover a block between storms. Our usual time from a grower's call to a plane over the field is 24 hours. To book your early-season flights, plan your dormant and bloom sprays with us.

Plan your dormant and bloom sprays

Questions

Crop nutritionNitrogen deficiency in crops: signs, tests and fixesOrchardsLeaffooted bug in almonds and pistachios: ID and timing

Get on the schedule.

Tell us the field and the job. In a hurry? Call (530) 695-2294, Mon–Fri, 8am–3pm.

PCA with a written recommendation? Send it here.

CallRequest an application