Skip to content
Sutter Butte Dusters

Rice

Rice growth stages: pests and weeds at each stage

By the Sutter Butte Dusters team · · 8 min read

A yellow Ag Cat biplane with shark-mouth nose art flies low above a dense rice field turning from green to gold in evening light.

Rice growth stages tell you what the crop can do next and which pests can hurt it now. University of California (UC) rice specialists divide the season into three parts: vegetative growth, reproductive growth and ripening. This guide explains each stage in plain words, and it shows which pests and weeds matter at each one.

What are the rice growth stages?

The rice plant passes through three main stages in order, according to the UC Rice Production Workshop manual, 2023. The length of each stage depends mostly on the variety. Weather, field practices and the planting date also change it.

StageWhat it coversWhat the crop is doing
VegetativeSeed germination to panicle initiationMakes leaves, roots and side shoots
ReproductivePanicle initiation to floweringBuilds and opens the seed head
RipeningFlowering to grain maturityFills each kernel

A panicle is the seed head of the rice plant. The UC manual gives these approximate days:

Point in the seasonEarly varietyLate variety
Tiller initiation25 to 30 days25 to 30 days
Panicle initiation55 to 60 days65 to 75 days
Flowering85 to 100 days110 to 115 days

Treat these numbers as a guide, because your field can differ. The UC manual reports that the same variety can vary by over a week in time to 50% heading, even with the same planting date. It also says dry-seeded rice takes about 5 to 7 days longer than water-seeded rice to reach 50% heading. So walk the field and check the plant.

Which pests and weeds matter at each rice growth stage?

The chart below comes from UC IPM's treatment periods page. It shows when a treatment gives the most effective control. It does not mean that every field needs a treatment.

Pest or weedUC treatment window
Bakanae (a seed-borne disease)Seed treatment before germination
Rice seed midgeGermination to the 2-leaf stage
Tadpole shrimpGermination to the 3-leaf stage
Algae1-leaf to 3-leaf stage
Rice water weevil1-leaf to 4-leaf stage
Broadleaf and grass weeds1-leaf stage to tiller initiation, and again in early tillering
Sedge weeds1-leaf stage to tiller initiation
ArmywormMidtillering, and again from panicle formation to flowering
Perennial weedsMidtillering to panicle formation
Aggregate sheath spot, kernel smut, rice blast, stem rotPanicle formation to flowering

Your pest control adviser (PCA) is the licensed person who decides if a treatment is needed. The PCA picks the product and the rate, and the label is the law. Our rice spray guide shows how these windows fit into a full season of flights.

What happens in the seedling stage?

The seedling stage is short, and it sets the number of plants for the whole season. UC IPM's rice developmental stages page names each step.

  • Coleoptile stage. A short shoot (the coleoptile) and the first root (the radicle) grow out of the seed.
  • First-leaf, or spike, stage. A green leaf blade comes out, and short crown roots form.
  • Second-leaf stage. A second leaf comes out above the first.
  • Third-leaf stage. A larger third leaf comes out, and the roots grow down and form root hairs.
  • Fourth-leaf stage. A fourth leaf comes out, and side roots grow from the main roots.

The UC manual says the seedling lives mostly on the food in the seed up to about the 2-leaf or 3-leaf stage. At the 3-leaf to 4-leaf stage, the plant starts to feed itself from sunlight and soil. It also says 20 to 25 seedlings per square foot gives the best tiller and panicle numbers.

Pests hit hard in this stage, because a dead seedling cannot recover. Tadpole shrimp and rice seed midge attack the seed and young shoot. UC IPM says midge injury matters only on germinating seed and very young seedlings. A seedling several inches tall can usually outgrow the feeding.

Weeds also start now, so the first herbicide windows open at the 1-leaf stage. Read our guides to watergrass, sprangletop and ducksalad for what to look for.

The rice water weevil matters from the 1-leaf to the 4-leaf stage. Adults lay eggs under water, and the larvae feed on the roots. UC IPM says eggs can go in before the plants come out of the water, so a few feeding scars can still mean serious injury.

What happens during tillering?

Tillering is the stage when the plant makes side shoots, called tillers. Each tiller can make its own panicle. The UC manual says tillers usually begin to appear at about the fifth leaf. It calls this stage even more important to final yield than the number of seedlings.

The goal is about 60 to 70 panicles per square foot. Under good conditions, the plant can make twice the tillers it needs, and many die before flowering. The UC manual says deep water reduces tillering, but usually not below the critical level when other factors are well managed.

Weeds and pests compete with tillers in this stage:

  • Broadleaf and grass weeds. UC's second window falls in early tillering.
  • Perennial weeds. The window opens at midtillering. A perennial weed lives for more than one year.
  • Armyworm. The first window falls at midtillering. UC IPM says to consider treatment only where defoliation is over 25% and larvae are present.
  • Water weevil damage. Root injury can mean fewer tillers and panicles, and it lets weeds establish.

Diseases show up here too, even though the treatment comes later. Stem rot starts as small black spots on the sheaths at the water line during tillering. Aggregate sheath spot also starts at the water line.

What is panicle initiation?

Panicle initiation (PI) is the start of the reproductive stage. At PI, the growing point stops making leaves and starts to make the panicle. The whole panicle forms at this time, but you cannot see it without a microscope.

The first sign you can see is the green ring. The UC manual says the green ring is a green band just above the top node, inside the stem. The band shows for only a couple of days, so it is easy to miss. Use these steps to find it:

  1. Pull several main stems from different parts of the field.
  2. Cut each stem lengthwise with a pocketknife.
  3. Look just above the top node for a green band.
  4. Record the date and the part of the field.

About one week after PI, the young panicle is large enough to see when you slice the stem through the base. It is then about 1 to 2 inches above the soil. The number of spikelets (the small flowers that become grains) is set at this time.

PI is also the point where nitrogen decisions come due. Our post on rice fertilizer top-dressing covers this decision.

What happens between panicle initiation and heading?

The panicle grows up inside the stem during this period. It is most at risk from cold when pollen forms. The UC manual gives the risk as temperatures of 55 to 60°F or less, depending on the variety. Cold can sterilize the flowers and leave empty grains, which is called blanking.

Water is the main defense. The UC manual says to raise the water to 8 to 10 inches, above the developing panicle. Keep it high from about 10 days after PI to 10 days before heading. The water acts as a heat sink and keeps the panicle warmer. Our post on the rice field covers this deep water period.

Boot is the stage when the panicle swells inside the top leaf sheath. Heading is the stage when the panicle comes out of the boot. UC IPM ties several disease decisions to these stages.

DiseaseTiming on the UC IPM page
Kernel smutPreventive, at mid-boot, in fields with a history of the disease
Rice blastProtect panicles as they leave the boot; preventive timing runs from mid-boot to boot-split
Aggregate sheath spotEarly heading, when the first panicles show above the canopy
Stem rotEarly heading, when the first panicles show above the canopy

Sources: UC IPM pages on kernel smut, rice blast, aggregate sheath spot and stem rot. Armyworm can also feed on panicles at this time. For the details on each problem, see our guide to rice pests and diseases.

What happens at flowering and ripening?

Flowering lasts two to three weeks, according to the UC manual. Temperatures above 104°F can dry the pollen and cause blanking, but this is much less of a problem than cold blanking. No field practice can prevent heat damage.

Ripening starts when flowering ends. The kernel fills with food from the leaves and stem, and the UC manual says it reaches physiological maturity at about 30% moisture. Physiological maturity means the kernel has stopped filling. A grower can lose grain weight, but cannot raise it above the variety's limit.

The last stage to watch is the time to drain. The UC manual defines R7 as the time when at least one grain on a panicle has a yellow hull. It says this is about when growers should consider a drain for harvest. A drain that comes too soon can leave the kernels short of water, and it can lower kernel weight and milling quality.

The treatment windows are mostly closed by now. Use this time to record what escaped, because next year's plan starts here. UC IPM says to check tillers for stem rot lesions at drain time. It also says to record weeds that escaped control from panicle initiation to heading.

Rice growth stage work from Live Oak

Sutter Butte Dusters flies rice crop protection and fertilizer jobs across Sutter, Yuba, Butte, Glenn and Colusa counties from 4080 Clark Rd in Live Oak. Our fleet has five Ag Cats and one Air Tractor 602. We apply the product your PCA recommends, at the label rate, inside the window for your crop stage. Learn more about our rice work, or get a quote for your field.

Get a quote for your field

Questions

Crop nutritionNitrogen deficiency in crops: signs, tests and fixesOrchardsLeaffooted bug in almonds and pistachios: ID and timing

Get on the schedule.

Tell us the field and the job. In a hurry? Call (530) 695-2294, Mon–Fri, 8am–3pm.

PCA with a written recommendation? Send it here.

CallRequest an application